Fabric Softener, approximately 18 %
PHASE |
Trade Name |
INCI |
%W/W |
1 | Water | 78.40 | |
Dyestuff, 1% | 0.60 | ||
REWOQUAT® WE 28 | Dihydrogenated Palmoylethyl Hydroxy- ethylmonium Methosulfate | 20.00 | |
Calcium Chloride, 25 % | 0.20-0.60 | ||
Perfume oil |
0.60 |
Processing
Heat the water to approximately 45°C. Add the dyestuff and the antifoam solution if required. Slowly disperse in the REWOQUAT WE 28, preheated to approximately 50°C, adding calcium chloride solution sufficient to maintain a good processing viscosity. Stir for about 10 minutes and cool to approximately 25°C, adding the perfume oil at between 30 – 35°c. Finally adjust to the required viscosity with calcium chloride, not below 30°C.
Remarks
Stir continuously throughout the preparation process. As far as possible avoid air entrainment. A substantial increase in the amount of calcium chloride could lead to separation of the dispersion. A dispersion with a preferred viscosity of approximately 80 mPas (+/- 40 mPas). Brookfield LVT, Sp. 1, 30rpm.